|
|
 |
Extensive experience
We have 15 years of experience as market leaders in the field of small-scale wood processing.
Warranty
Logosol provides a one-year warranty on our machines: the Logosol Sawmill, the Timberjig, the Bandsaw, the Electric Chainsaws, the Log House Moulder, the Petrol Chainsaws and all our Planers/Moulders.
Fast deliveries
Very fast deliveries of accessories and spare parts.
Unlimited support
Unlimited phone support when it comes to product knowledge and use of products.
Personal service
To us, offering a first-rate personal service comes natural.
|
|
Technical Data |
Working measurements |
| Maximum board stack for Stack Cutter 1500: |
| Max. width: |
1450 mm |
| Max. height: |
1450 mm |
Dimensions |
| Stack Cutter outer measurements. |
| Length: |
2600 mm |
| Width: |
1100 mm |
| Height: |
1900 mm |
Electrical system and motor |
| The electrical motor is a specially wound, Danish ABB motor with a rated output of 5kW. While cutting, the motor load is 7-8000 W. It is protected by a temperature sensor. |
| Total continous output: |
5 kW |
| Electricity supply: |
3-Phase 16A , 400V |
| Insulation class: |
IP54 |
| This insulation class means that the motor and the entire electrical system are unaffected by running water, thus capable of standing outdoors in the rain. |
Sound level and ergonomics |
The Stack Cutter 1200 is designed to provide the user with the best possible working conditions. The controls are positioned at work height and a Plexiglas sheet protects the operator against any flying chips.
The sound level requires hearing protection. |
| Acoustic pressure: |
102,0 dB (A) |
| Acoustic power: |
113,0 db (A) |
| Vibrations in the controls: |
Very slight |
Cutting equipment |
| Logosol has a deep experience with different cutting machines and have chosen a standard 3/8” cross-cutting chain for the Stack Cutter. |
| Chain pitch: |
3/8 inch |
| Chain speed: |
22,5 m/s
|
Chip handling |
The Stack Cutter works perfectly well without any chip transport equipment. However, since this will create considerable quantities of chips on the work site, a chip fan is recommended.
A simple chip fan is included with the Stack Cutter 1200 as an accessory
to be fitted on the Stack Cutter support legs. Connecting the Stack Cutter
to existing chip evacuation systems works equally well. |
| Chip outlet (connection for flexi-hose): |
100 mm |
| Min. chip fan capacity needed: |
700 m3/h
|
- Lightweight and sturdy structure constructed from aluminium beams - 100%
anticorrosion protection.
- Levelling sight assures precise alignment of sawing line.
- Automatic saw lubrication by means of large transparent oil
reservoir.
|
- Can be bolted to the ground for stationary use.
- Levelling arm to position the kerf.
- Crank operated vertical angle adjustment.
- Large wheels for easy movement.
|
- Wood chip collection channel 4" (100 mm).
- Capable of sawing stacks up to 1.5 m x 1.5 m (5 ft x 5 ft).
Precision +/-2 mm.
- Maximum motor power 10kW.
- Crank operated lifting and lowering of the saw unit.
|
|
 |
|
