|
|
 |
Extensive experience
We have 15 years of experience as market leaders in the field of small-scale wood processing.
Warranty
Logosol provides a one-year warranty on our machines: the Logosol Sawmill, the Timberjig, the Bandsaw, the Electric Chainsaws, the Log House Moulder, the Petrol Chainsaws and all our Planers/Moulders.
Fast deliveries
Very fast deliveries of accessories and spare parts.
Unlimited support
Unlimited phone support when it comes to product knowledge and use of products.
Personal service
To us, offering a first-rate personal service comes natural.
|
|
| ARTICLE NO. | PRODUCT | PRICEINFORMATION | | Excl. VAT | Incl. VAT | | 4707-000-1101 | M7 Sawmill | £1445 | £1697.88 | | 4507-000-0066 | M7 Sawmill with Stihl MS660 | £2125 | £2496.88 | | 4507-000-0088 | M7 Sawmill with Stihl MS880 | £2386 | £2803.55 | | 4507-000-0005 | M7 Sawmill with Logosol E5000 | £2510 | £2949.25 | | 4507-000-0006 | M7 Sawmill with Logosol E5000 Auto | £3060 | £3595.50 | | 9999-000-0200 | Start-Up Kit Sawmill | £97 | £113.98 | | 9999-000-0201 | Help Kit for Sawmill | £144.50 | £169.79 |
The M7 Sawmill Will Make
Your Life More Complete
With the Logosol Sawmill you can saw
a tree on site on a woodland plot, in the
lengths and dimensions of your choice.
Because it is lightweight and easy to
use, you can easily take it with you
without the help of others.
Since our first sawmill appeared on the market
in 1988, its construction and design have been
improved. This has resulted in the perfect oneman
sawmill. Over 20 000 Logosol Sawmills
have already been sold around the world. At
the same time, the sale of spare parts is
insignifi cant, and that says quite a lot.
Mobile or Stationary
Many of our customers have stationary
Logosol sawmills, but one of the advantages
with the sawmill is that you can take it to the place
where the timber is, e.g. to the forest or to
your cottage. Once you have done that, all that
is left for you is to fell a tree and then process
it into boards, planks and beams.
Impressive Precision
The accuracy of our sawmill is very impressive.
You can saw whatever you wish, from beams for
log frame structures, to millimetre thin sheets.
The Logosol Sawmill can process logs from
any tree you will fi nd in a forest or in a garden:
oak, aspen, apple-tree, cherry-tree, and so on.
The sawmill is easily handled by one man. You
are only limited by your imagination.
Professional Results at Once
Logs are rolled onto the mill from a log table
with the working height of 55 cm. They are
then lifted up to saw height with a turn of
the hand-operated crank. The sawed boards
lie accessible at waist height and are easy to
lift off. Hence the Logosol Sawmill not only
saves your time, but also spares your back.
The saw carriage slides effortlessly along a
stable guide rail. Visible and audible gradations
permit the adjusting of the sawmill’s settings
to be both easy and accurate. All instructions
can be read in the manual that comes with
each sawmill. The Logosol Sawmill is made
from anodized aluminium, which is resistant to
corrosion, is lightweight, and yet very durable.
The smooth surface of the guide rail has a
low friction coeffi cient, is easy to clean, and
requires minimal maintenance service. Logosol
utilizes a thinner guide bar and chain, which
contributes to signifi cantly faster sawing. The
result of using the thinner guide bar and chain
is that the cut taken is only insignifi cantly wider
than the one taken by a circular saw. One sharp
chain saws approximately fi ve normal sized
logs before it needs to be re-sharpened.
High Production Capacity
The Logosol Sawmill is run with an ordinary
power saw of a minimum capacity of 60 cc.
The typical saw unit is a Stihl MS660 92 cc
or a Husqvarna 385XP 85 cc. With such an
equipment you can saw 5 metres per minute
from a 6 inch thick beam. The powerful electric
saws Logosol E5000 and E6000 nearly double
the speed. If you use the Logosol Bandsaw
you can even saw 16 metres per minute. But
technical data is one thing, working in practice
is another. The logs shall not only be sawed up,
but also be stacked, new logs need to be rolled
to the saw and, above all, you will need a coffee
break now and then. Our customers say that
one operator alone can produce between two
and three cubic metres sawed lumber in one
working day – and we believe them!
| "The majority of
owners of our
sawmills think
that the best thing
with the sawmill
is the satisfaction you feel when
sawing up your own timber. You will
feel it yourself, when the fi rst batch of
sawn material is stacked for drying.
Furthermore, your coffee will taste
better when you're sitting on your
home-made porch, made of planks
which you yourself have sawn . At
least it feels that way."
Bengt-Olov Byström, MD Logosol |
|
|
 |
|
