Features

M7 with extension

Handles most sizes

Quick Assembly

The mill, when assembled, will cut accurately. Because of the high quality and precision of the parts, none of the angles need setting. The only adjustment required is for the cutting height and once that is set, the mill is accurate in all dimensions.

Portable

The entire sawmill is made of anodised extruded aluminium and weighs only 52kg (115lbs) - it can easily be carried by one person and transported on a car roof-rack to remote areas. Move the mill, not the logs.

Strong construction

Made of anodized, extruded aluminium, the mill is extremely strong for it's size, easily supporting and lifting over ten times it's weight. The aluminium is of the highest quality available, in the same class as that used for aircraft construction.

Ergonomic construction

This mill is designed with the operator in mind. Everything is at the right height for long hours of operation without back strain. It is easy to use - no pushing the saw through the wood.

Easy maintenance

The M7 is rust proof - all parts are weather resistant. Anodised aluminium, stainless steel bolts and nylon slides are used in the construction. There is very little to break, adjust or wear out in this mill.

The work site

The logs are best handled on log tables and the sawmill is designed to allow the logs to be rolled directly from the log table onto the log bed and to be sawn at working height.

Accurate sawing

The log is placed on one or two log shelves which can be moved up and down. One end of the log is held in place by a spiked bumper. The saw runs on a straight guide rail and saws the log very accurately. The special chain and blade allows the chain saw to cut straight with very high accuracy even in low grade quality saw logs. No "band-saw waves".

Smooth surface finish

The surface is so smooth on lumber finished with the M7, it can be finished with a belt sander. With the ease of log handling and positioning, using the independent log bed suspension, you can maximise the cutting of the log to produce the best lumber.

Unique, low-profile ripping chain

The chain used on this sawmill is manufactured by the world's leading chainsaw manufacturer and has been proven as a reliable cutting solution, and produces an amazingly smooth surface. This narrow chain takes only ¼" (6mm) kerf. Easily sharpened, these chains will last through 3000 bd. Ft of cutting.

Safe

This sawmill has been designed with safety in mind. The chain pulls the wood against the bed, firmly holding it in place while cutting. The use of the mill involves both hands, keeping the possibility of accidents at a minimum.

Independent log bed suspension

The two Log beds move up and down, separately allowing for easy levelling of the log to achieve the most productive cut. This feature also provides the ability to produce tapered and angle cuts.

Log bed raises in two increments

You can easily switch from ¼" (6mm) to 1/8" (3mm) increments to produce lumber to the accuracy desired. Three pulleys combined with a nylon poly line provide maximum lifting capacity. Easily lifts a log up to 500kg (1100lbs).

Instruction manual

Each M7 comes with a 34 page instruction manual.